Upgrade your dash cam with the 70mai Hardwire Kit UP02—continuous power, 24/7 parking mode, low-voltage protection, and seamless ACC detection.

Specifications

• Input Voltage: DC 12–30 V

• Output Voltage: 5 V

• Output Current: 2.4 A

• Cable Length: Approximately 3.3 m (10 ft)

• Low-Voltage Protection Threshold:

  • Small vehicle: ~11.4 V

  • Large vehicle: ~22.8 V

• Operating Temperature: -20 °C to 70 °C

• Storage Temperature: -30 °C to 85 °C

• Connector Type: Micro-USB (for dash cams with Micro-USB ports)

Key Features

• 24/7 Smart Parking Surveillance: Powers your dash cam straight from the car battery, enabling parking mode even when the engine is off.

• Automatic ACC Detection: Dash cam switches to recording mode when you turn on the engine—and reverts when turned off.

• Battery-Saving Protection: Prevents deep discharge by cutting power when the car battery is too low to start.

• Extra-Long Cable: 3.3-meter cable ensures hassle-free installation across most vehicle interiors.

• Wide Dash Cam Compatibility: Ideal for 70mai models including Dash Cam 3, S500, A800S, A500S, Lite 2, A400, A200, M300, and more.

• Plug & Play Simplicity: Taps into ACC, constant power, and ground—no hard-to-find adapters or bulky setup required.

Supported Dashcam Model

• 70mai Dash Cam Pro Plus A800s
• 70mai Dash Cam 4K A800S
• 70mai Dash Cam M300
• 70mai Dash Cam A200
• 70mai Dash Cam Pro D02
• 70mai  Rearview Dash Cam Lite D08 Wide D07

What’s in the Box

• 1 × 70mai Hardwire Kit UP02

• 1 × Installation Guide / User Manual

Keep your 70mai dash cam running continuously—even while parked—with the Hardwire Kit UP02. Once connected to your vehicle’s battery and fuse box, this accessory ensures uninterrupted power and seamless transition between driving and parking surveillance modes thanks to ACC signal detection.

Equipped with built-in low-voltage protection, the kit safeguards your vehicle’s battery from excessive depletion—ensuring you’ll always have enough power to start the engine. Its long cable length provides flexible installation, while compatibility with a wide range of 70mai cameras makes it a versatile add-on.

This kit is the ideal upgrade for any driver looking to enhance vehicle security and capture footage while parked, all without damaging their battery.

Things You Should know

• Always verify your vehicle’s fuse box labeling before connecting ACC and VCC wires to prevent installation errors.

• Ensure the protective fuse is correctly installed to maintain safe operation.

• If the ACC signal fails to trigger, test signal behavior—they vary by car model and may delay activation.

• For hardwiring assistance, consider consulting a professional installer.

Power your dash cam smarter with the 70mai Hardwire Kit UP02—now available at Hello Bazar (hellobazar.com.bd).